C Stamp Product Line


 HOME      PRODUCTS      ACCESSORIES      SENSORS      COMPONENTS      ROBOTICS      SUPPORT      FORUMS      CONTACT US             Toll-Free Sales: 1-800-985-AWIT


  PROD
UCTS
 
  C Stamp Products
  
C Stamp Accessories

   Sensors
    Color/Light
    Compass/GPS
    Object Detection
    Temperature/Humidity
    Pressure/Force/RPM
    Flow
   Components
   Robotics
   Instruments and Tools
   Apparel
   Gift Certificates


  SUPPORT
   Discussion Forums
   Knowledge Database
   A-WIT Downloads
   EMail Technical Support
   Telephone Support  
  
  
Authorized Consultants



  KEY LINKS
   System Description
   Project Gallery
   Terms and Conditions
   Contact A-WIT
  
Privacy Policy

   Ordering Info
   Distributors
   Fun Zone

   SALES
 


 
Part#:
 CS452500
 
Precision Fahrenheit Temperature Sensor
  Price:  $3.18

Precision Fahrenheit Temperature Sensor

Multiple Quantities* Unit Price
2 or more $3.03

* Request via e-mail to sales@a-wit.com

DESCRIPTION: 
The CS452500 is a precision integrated-circuit temperature sensor, whose output voltage is linearly proportional to the Fahrenheit temperature. The CS452500 thus has an advantage over linear temperature sensors calibrated in degrees Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Fahrenheit scaling. The CS452500 does not require any external calibration or trimming to provide typical accuracies of ±0.5°F at room temperature and ±1.5°F over a full −50 to +300°F temperature range. The CS452500’s low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. It can be used with single power supplies or with plus and minus supplies. As it draws only 75 μA from its supply, it has very low self-heating, less than 0.2°F in still air. The CS452500 is rated to operate over a −50° to +300°F temperature range. The CS452500 is packaged in a plastic TO-92 transistor package. The Temperature Sensor is compatible with the C StampTM microcomputer’s supplies and signal levels. Communicating with the Sensor is made easy with A-WIT's supplied software command ANALOGIN. The built-in C Stamp Analog to Digital Converter and this simple command interface is all that is required to acquire temperature readings from the Sensor.

All items are new, fully tested, factory direct!

All software included at no extra charge!

Technical Specifications

  • Calibrated directly in degrees Fahrenheit
  • Linear +10.0 mV/°F scale factor
  • 1.0°F accuracy guaranteed (at +77°F)
  • Rated for full −50° to +300°F range
  • Suitable for remote applications
  • Low cost due to wafer-level trimming
  • Operates from 5 to 30 volts
  • Less than 90 μA current drain
  • Low self-heating, 0.18°F in still air
  • Nonlinearity only ±0.5°F typical
  • Low-impedance output, 0.4W for 1 mA load
  • Compact and breadboard-friendly
  • Compatible with C Stamp microcomputer

Related Items
C Stamp 48-Pin Module
Digital Compass Sensor

Documentation
CS452500 Data Sheet



Do you need more information?

E-Mail Us ... info@a-wit.com
 


Contact Us Terms of Use Privacy Policy
         
Home © A-WIT Technologies, Inc. All Rights Reserved. Return to Top