|
Part#: CS455010
8-Bit Serial-Input Latched Source Driver
Price: $2.24
|
|
 |
|
... click above for
larger image ... |
|
DESCRIPTION:
The CS455010 latched driver is a high-voltage, high current
integrated circuit comprised of eight CMOS data latches,
CMOS control circuitry for the common STROBE and OUTPUT
ENABLE, and bipolar Darlington transistor drivers for each
latch.
Bipolar/MOS construction provides extremely low power
latches with maximum interface flexibility.
The CS455010 will typically operate at 5MHz with a 5V logic
supply.
The CMOS inputs are compatible with standard CMOS, PMOS, and
NMOS logic levels. TTL circuits may be used with appropriate
pull-up resistors to ensure a proper logic high input.
A CMOS serial data output allows additional drivers to be
cascaded when more than 8 bits are required.
The CS455010 has open-emitter outputs with suppression
diodes for protection against inductive load transients. The
output transistors are capable of sourcing 500mA and will
sustain at least 35V in the on-state.
Outputs may be paralleled for higher load current
capability.
The CS455010 is available in a 16-pin plastic DIP package.
The devices are compatible with the C Stamp microcomputer’s
supplies and signal levels. The devices are supplied in a
16-pin DIP form factor package that can be used in
breadboards or printed circuit boards. Interfacing with the
shift register is made easy with A-WIT's supplied software
command SHIFTOUT. This simple one commands interface is all
that is required to write to the shift register.
All items are new, fully
tested, factory direct!
All software included at no
extra charge!
Technical Specifications
- High-Voltage
Current-Source Outputs
- Output transient
protection diodes
- CMOS-, PMOS-, NMOS-, and
TTL-compatible inputs
- 5MHz typical data input
rate
- Low-power CMOS latches
- Applications
- Alphanumeric and bar
graph displays
- LED and incandescent
displays
- Relay and solenoid
drivers
- Other high-power loads
Related Items
C Stamp 48-Pin Module
Documentation
CS455010 Data Sheet
Do you need more information?
E-Mail Us ...
info@a-wit.com
|
