DESCRIPTION:
Standard 4-Phase 12 Volt Unipolar Stepper Motor.

All items are new, fully tested, factory direct!

Technical Specifications

• 4 phases unipolar
• Voltage: 12 VDC
• 0.703125° step angle
• 512 steps per mechanical revolution
• Phase resistance: 160 Ω
• Current: 75 mA
• Holding torque: 920 g-cm (90.3 mN-m)
• Pull in torque: 500 g-cm (49.1 mN-m)
• Detent torque: 350 g-cm (34.4 mN-m)
• No load pull out frequency: 1000 pulses/S
• No load starting frequency: 600 pulses/S
• Mounting holes space (diagonal): 1.54"
• Mounting holes: 0.17"
• Shaft diameter: 0.12"
• Shaft length: 0.44"
• Motor diameter: 1.42"
• Motor height: 0.69"
• Ball bearing
• Dielectric strength: 500 V, 50 Hz/minute
• 18" lead wires
• Ambient temp.: -10 °C to 55 °C
• Insulation resistance: 100 MΩ @ 500 VDC
• Compact

Related Items
C Stamp 48-Pin Module
8-Channels Darlington Sink Driver

Documentation
CS610002 Stepper Motor Reference Guide Manual

External Links
Subscribe to Servo Magazine


Do you need more information?

E-Mail us ... info@a-wit.com