DESCRIPTION:
Wireless Robotics! This Kit combines the BOL-BOT robotics
platform with everything necessary to add Bluetooth
capabilities. With this kit, your BOL-BOT can communicate
with a Bluetooth enabled PC, and make a multitude of
projects a reality. Here are some examples of those types of
projects: using the BOL-BOT with the RoboRealm Machine
Vision System or with the Microsoft Robotics Development
System (MSRDS). Lots of fun!
All necessary software, documentation,
projects that you can use as a starting point for your own
ones, and highly illustrated instructions written by College
professors are included in the Kit CD.
The BOL-BOT is unique in the sense that users develop a
robotics platform as an embedded system using professional
software development tools and a professional programming
language in a very user friendly environment. The power and
versatility of the C Stamp guarantees that you can expand
upon your robot with your own ideas, projects, and
imagination. Well thought out and pedagogically sound
examples developed by College professors make sure that
getting started in robotics with the BOL-BOT is a powerful
and enjoyable experience.
137 pieces
total.
All items are new, fully
tested, factory direct!
Technical Specifications
Extra Decks can be added
Can be expanded to draw
Supports 4 placements of
the BOL
Chassis Diameter: 9.18
inches
4 pre-drilled holes on a
6.68 diameter for accessories and expandability
6 pre-drilled holes on a
7.18 diameter for accessories and expandability
8 pre-drilled holes on a
7.68 diameter for accessories and expandability
4 pre-drilled holes on a
8.80 diameter for accessories and expandability
2 Futaba S3003 Precision
Servos with 3.40 kg-cm/47oz-in of torque and a speed of 60
rpm
2 double rubber layered
wheels
2 steel ball-rollers
mechanism based casters
CONTENTS DESCRIPTION
MINIMUM
QUANTITY
CS110000 C-Stamp
1
Board
of Learning Development Board - Microcontroller
Fundamentals - µC 101
1
Power supply (230V)
Save battery life while
programming.
1
PC
cable (Serial)
1
PC
cable (USB)
1
Robot
Chassis
1
Continuous Rotation Servos with Extra Horns/Hardware
2
Self
Tapping Servo Screws
4
Wheels
2
Wheel Screws
2
Rubber
Traction Belts for Wheels
4
Servo
Brackets
4
Self
Tapping Servo Bracket Screws
4
Ball
Casters with all hardware
2
Ball Caster Spacers
8
Two
State Long Lever Limit Bumper Switches
2
Mounting Bolts
12
Mounting Nuts
16
Standoffs for BOL
4
Standoff/BOL Screws
4
Infrared Transmitter
1
Infrared Transmitter Shield
1
Infrared Receiver
1
287 OHM 1/4W ±1% Metal Film
Resistors
2
10 K-OHM 1W ±5% Metal Film
Resistors
2
10 μF Electrolytic
Capacitors
2
1.8 K-OHM 1/4W ±1% Metal
Film Resistor
1
Piezo Speaker
1
Photo-Resistor
1
4 cm
hook-up wires
20
10 cm
hook-up wires
7
17 cm
hook-up wires
10
9V Battery
1
Software installation and
documentation CD
1
Bluetooth-Serial
Module-Class 2 with Built-in Antenna
